National Consulting Hotline 400-0590-280
Haisheng rubber O-ring production standards meet international standards and have a dust-free workshop to ensure the cleanliness of O-rings.
Therefore, the O-ring must be assembled in accordance with the correct requirements before use to ensure that its sealing effect can be fully exerted. At present, imported O-rings are widely used in automobiles, water conservancy and construction production machinery. They not only have the characteristics of safety and environmental protection, but also the unification of their production standards has also promoted the expansion of the application market of O-rings. However, it should be noted that when using environmentally-friendly O-rings, pay more attention to the details during the installation operation.
The main points to note when using O-rings are the following:
1. Keep the installation environment clean during installation, especially to prevent dust from entering the installation site. If hard particles enter, it is likely to cause serious damage to the surface of the O-ring during operation, thereby reducing the overall service life of the product. The damage to the surface material will also increase the internal corrosion of oil and other substances, which will cause greater damage after a period of application.
2. Before installation, clean the surface of the O-ring, and at the same time thoroughly clean the installation area, especially the contact surface. This is done to increase the contact surface between the O-ring and the sealing part, and to achieve a more stable seal. The effect is that the surface of the equipment can be inspected, and if there are small cracks and unevenness, it can be found and maintained in time. Generally, only when the surfaces of both are smooth, the O-ring can properly exert its sealing function and have a long service life, otherwise it is easy to cause wear.
Therefore, in the process of installing the O-ring, it is necessary to ensure the cleanness of the installation environment and the surface of the O-ring, and to properly handle all details. Service life to avoid accidental severe wear. In this process, special attention must be paid to the protection of working conditions. Smoothness and cleanness of the contact surface are the basic prerequisites. Our Haisheng Rubber has a dust-free workshop to ensure that the cleanliness of the O-rings meets international standards.
If you are interested or have questions about our Haisheng Rubber, welcome to the official website for consultation
[Label this article]:
[Responsible editor]: Cixi Haisheng Rubber Products Co., Ltd. All rights reserved: http://rmhym.com/ Reprinted please indicate the source