National Consulting Hotline 400-0590-280
The fluorine rubber seal ring is the core of the hydraulic equipment and is the guarantee of the normal operation of the hydraulic equipment. Therefore, the installation of hydraulic fluororubber seals is very important. Any errors in the installation process may affect the sealing performance, and then affect the normal operation of the hydraulic equipment. Therefore, before installation, it is necessary for the operator to understand the precautions for the installation of fluoro rubber seals. In addition, the storage work before the installation of the fluoro rubber seals should also be in place.
氟橡胶密封圈 的安装注意事项以及存储环境： Next, Haisheng Rubber takes you to understand the installation precautions and storage environment of fluoro rubber seals :
Matters needing attention when installing fluorine rubber seals in hydraulic cylinders:
1. Check the relevant surfaces of the piston, cylinder and mounting guide sleeve. The full bag is clean, without burrs, and without edges.
2. The installation tools must be smooth, without edges and sharp corners, to ensure that no damage is caused to the fluoro rubber seal during the installation process.
3. During installation, a small amount of grease can be applied to the fluorine rubber seal ring and the relevant surface of the cylinder barrel to facilitate installation. However, no residual grease is allowed between the rubber elastomer and the sliding seal ring, otherwise the sealing performance will be affected.
4. Regardless of the vertical or horizontal installation, the coaxiality of the piston and the cylinder should be maintained. Excessive eccentricity is likely to damage the fluorine rubber seal.
5. The installation speed should not be too fast, otherwise the fluorine rubber seal ring will be damaged.
Storage of hydraulic fluoro rubber seals:
During storage and storage, the fluorine rubber sealing ring should be packed in a sealed moisture-proof plastic bag, and records such as the storage date should be recorded, and then stored in a dark place to avoid poor storage and storage such as high temperature or direct sunlight, which will reduce its sealing performance.
Through the above introduction, we know the matters that should be paid attention to during the installation of the fluoro rubber seal in the hydraulic cylinder, and also understand its storage requirements. 氟橡胶密封圈 ，使其使用寿命变长，性能达到更好的效果。 We hope to help you make better use of fluoro rubber seals , make them longer in service life and achieve better performance.
If you have more questions, welcome to the Haisheng Rubber Products website for consultation.
[Label this article]:
[Responsible editor]: Cixi Haisheng Rubber Products Co., Ltd. All rights reserved: http://rmhym.com/